Oxygen Refill 50L, pressured at 200Bar. For Heating, Cutting and Welding

Description

Oxygen is commonly used as a fuel gas for cutting, welding, brazing and soldering and gives a much higher temperature than if air is used. Combine this with Mapp Gas (3200C) or propane (2500C) for the perfect brazing or cutting kit.

• Cylinder content 50L at 200bar.
• Cylinder size 160cm * 20cm
• Cylinder content 10.0m3
• They use the same regulator fittings as BOC, Air products and Air liquid
• No bottle rental
• No environmental charges
• No fees to come and collect a cylinder
• A deposit of £135.00 is charged per cylinder, which is fully refundable on return of cylinder at any point in time

These cylinders are aimed at businesses that can go through a 50L cylinder at least every 3 months. For businesses that do not use this amount of gas we have our range of 20L Trade Gas cylinders, which are for people who can go through a 20L at least twice a year. For all other customers we have our 10L Hobby Gas range of cylinders, which have no usage constraints on the cylinder.

All cylinders are owned , maintained and tested by Adams gas and are never at any point owned by the user. To check the test date of a cylinder, please look at the coloured ring around the gas valve.

The deposit on the cylinder is held by Adams gas and is fully refundable on return of the cylinder, at any point and is not subject to a limited time frame.

The deposit will only be refunded to the account holder, should the cylinder be passed on to a third party, please notify us to avoid any confusion later on.